Starter package    $6,450
Frame, a-arms, trailing arms, sub frame.
Welded and tabbed for: hayabusa powerplant, suspension, shocks, seats, seat belts, and floor. Some welding required for tabs, no structural welding required.

Optional Kit A $1,950
Spindles, rear bearing carriers, stubs, bearings, control rods, all heims and miss-alignment spacers, center load rack, bump steer bracket.

Optional Kit B $1,350
Fully welded tab kit (no welding required when receiving kit) consisting of:
Panel tabs, radiator tabs, gas tank tabs, battery tray, headlight tabs, whip tabs, center console tabs. Panels, center aluminum console drilled for 6 switches and 1 momentary.

Optional Kit C $650
Front aluminum hubs

Optional Kit D $950
Front hubs and brakes

Optional Kit E $950
Rear sprocket carrier and sprocket.
Carrier is eccentric so there is no roller tensioner used to tighten chain.

Optional Kit F $450
Front brakes and rotors

Optional Kit G $350
Front beadlock rims

Roller Kit $12,950
Includes everything in the starter package and Optional Kits A.
PLUS 31" tall paddles on bead lock, 15x12 rims, 28" tall razors on spindle mount rims, 2.0, 10" air shocks up front, 2.0, 14" air shocks in the rear, rear outboard brakes and hubs.

Roller Kit PLUS $15,950
Includes everything in Roller Kit, plus Optional Kit B, double bypass shocks up front, air bump stops in the rear.

2-Seat Full Foller Package $24,450
Includes everything in 2 Seat Turnkey Package minus motor / motor accessories (headers, pipe, filter, etc.), wiring / fuel / radiator / brake lines and powder coat.

2 Seat Turnkey Package (busa powerplant only): $29,950
Hayabusa powerplant, sprocket drive with custom center carrier that eliminates chain tensioner, 2.0 air shocks up front, 2.0 airshocks in rear. (Package comes with spindle mount front rims)

2 Seat Turnkey Package (PLUS) (busa powerplant only):
$32,850
Everything included in the busa package AND double bypass up front, air bump-stops in rear, front aluminum hubs, beadlocks on all 4 corners with 5 bolt pattern wheels and custom after-market oil cooler system, aluminum hood, roof and side panels. (Add $450 for front brakes)

2 Seat Turnkey Package (ULTRA) (busa powerplant only):
$33,950
Everything included in the busa package AND passenger grab bar, passenger step bar, pipe, power commander, custom mapping. (Add $450 for front brakes)

For West Coast sales of turn-key rails, please contact our distributor in Phoenix, AZ at: www.federalsandrail.com